Cut.Folded.Welded.
Sheet metal parts, flashings and welded assemblies, made to your drawing in one building. Twelve years fitting what we now make.
We work with
How do you want to start?
Pick the one that matches what you already have. All three reach the same workshop, and a person reads every enquiry and sends a written quote back within 1 to 2 working days.
I have a schedule
A list of flashings or parts: a spreadsheet, an architect's PDF, a drawing, or a photo of a handwritten sheet.
Send a scheduleYou send
The schedule, exactly as it is
I know the shape, but it isn't drawn
Set a flashing out on screen the way you would sketch it on site, flat, fold, flat, fold, and the girth adds itself up.
Draw your flashingYou send
Sizes, lengths and quantities
I have a drawing or CAD file
Metal on the fibre laser; aluminium, acrylic, ply and board on the router; then folded, welded and finished as needed.
Send your fileYou send
DXF, DWG, AI, SVG, PDF, STEP
Not sure which? Ring the workshop on 01294 271463 or send us a message.
Why choose us
One shop, start to finish
Cut, folded and welded in one unit in Irvine, with finishing arranged for you. Your parts never travel between suppliers, and there is one person to phone.
We have fitted what we make
12 years installing cladding and roofline work. We make parts that work on the building, not only on the drawing.
Made to your drawing
Your sizes, not the nearest stock size. A single prototype or a production run.
Checked twice before it leaves
Every part is checked by the person who made it, then by a manager.
Full-size sheets
A 3m router bed, a 3m folder and a 3.165m guillotine, so long parts come in one piece without joins.
Materials from names you know
Sheet from Tata Steel, Richard Austin Alloys, Amerex, Kingspan, Trimo and ArcelorMittal, the main manufacturers and suppliers we work with.
Straight answers
Talk to the people who make it. We reply within 1 to 2 working days, and if something will not make cleanly we tell you before we cut, not after.
What we make
Cut, bent, welded and finished in one workshop. Every part below is a render of the kind of work each service does.
RenderFlashings
Flashings, cappings, fascias, soffits and rainwater goods folded to your specification.
Router cutting
Aluminium, wood, acrylic and other plastics, routed from a single prototype to large runs.
RenderSheet metal parts
Brackets, panels and enclosures cut, folded and finished under one roof.
Metal cutting
Steel, galvanised steel, aluminium, brass and stainless, laser cut to your drawing.
RenderWelding
Brackets, frames and fabricated assemblies welded and held square on the fixture table.
RenderFinishing
Powder coating in any RAL colour, one side or both, marine grade where it faces the coast, and anodising, arranged for you. Plus 0.7mm pre-finished steel in a range of colours.
What we cut and fold
- Galvanised steel1.2mm · 1.5mm · 2mm
- Aluminium J57S (UP)3mm
- Aluminium 50832mm · 3mm
- Aluminium 10501.5mm · 2mm · 3mm
- Bright White Liner (Tata)0.7mm
- Colorcoat Leathergrain (Tata)0.7mm
- Colorcoat Prisma (Tata)0.7mm
Finished as you need it: powder coating in any RAL colour, one side or both and marine grade for the coast, and anodising, arranged through our finishing partner, plus 0.7mm steel in a range of colours and finishes.
A little planning. Better parts.
How each machine works, what it needs from your drawing, and where its limits are. Read it before you draw and the first quote is usually the last.
Read the guide
Made in the UK.Delivered UK-wide.
We make your parts at our workshop in Irvine, North Ayrshire. Collect them from us, have us deliver them across the West of Scotland, or we pack them up and send them by courier anywhere in the UK.
Inside the workshop- Made in
- Irvine, Scotland
- Our delivery
- Across the West of Scotland
- By courier
- Anywhere in the UK
- Collection
- Unit 1, 16 Kyle Road, Irvine
Let’s make your next part.
If it can be cut, bent, welded or finished, it is worth asking.